Used Aronson 14×14 Manipulator

Used Aronson 14×14 Manipulator

• Reach Travel: 168” 
• Variable speed reach from 18″ to 186″ at  100 – 2.0 IPM
• Lift Travel: 168″
• Constant speed lift from  38.75 ” to 206.75″ at 32 IPM 
• 900lb. weight capacity on either or both ends of boom
• Bolt down X-Base
• 360 degree manual mast rotation
• Approximate overall height: 20′ 5″
• Hand held pendant control 
• 460 V, 3-PH
• S/N:79209
• Optional Accessories:
  • Lincoln Powerwave AC/DC 1000SD power supply
  • Lincoln MAXsa wire feed package
  • Flux recovery packages
  • Lincoln seam trackers
  • Pandjiris powered cross slides

This  Aronson 14×14 Manipulator is designed to speed up the welding process in a number of ways. With the 900lb capacity at both ends of the boom, it makes it easier to hold the welding equipment over a work piece. This allows for welding over a longer period of time without operator fatigue. Furthermore, this reduction in starts and stops minimizes the possibility of weld defects. Another very common use for a welding manipulator is to use the variable speed boom as a welding axis to complete longitudinal welds. These longitudinal welds can be completed on the outside perimeter of a tank, vessel, or pipe, or you can reach inside those same work pieces to complete the internal welds which can prove to be much more difficult. Weld Plus is able to outfit this manipulator with your choice of welding process. 

If you have any questions about this item, or any other items, call our toll free number at 800-288-9414. Our knowledgeable sales staff is available to help assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com.