Used 11×11 Pandjiris Weld Manipulator

Used 11×11 Pandjiris Weld Manipulator

• 11’ constant speed power lift at 48 IPM
  • 16 7/8″ to 11′ 9-7/8″
• 11’ variable speed power reach of 3.0 to 116 IPM
  • Starting at 19-1/4″
• 500 lb. weight capacity on either or both ends
• Spring loaded, self energizing pawl anti-fall device
• 360° manual rotation on a 24″ x 24″ bolt-down base
• Pendant control
• Overall height of 15′ 4″
• Input Power: 460V
• Serial # 400-8577

Outfit with the welding process of your choice! 

This Used 11×11 Pandjiris Weld Manipulator is designed to speed up the welding process in a number of ways. The purpose of a welding manipulator like this one, is to hold the welding equipment over a work piece so that the operator does not have to hold it in his or her hands while the part is moving beneath the torch. Furthermore, The part being welded is usually moved or rotated under the torch by use of a positioner or a set of tank turning rolls. By using a manipulator as a fixture to hold the equipment steady, the welding can take place over a longer period of time without fatigue from the operator which can result in multiple starts and stops. In addition, you only need one start and stop to complete most welds. This reduction in starts and stops minimizes the possibility of weld defects which can sometimes be caused from improper starting and stopping.

Another very common use for a welding manipulator is to use the variable speed boom as a welding axis to complete longitudinal welds. These longitudinal welds can be completed on the outside perimeter of a tank, vessel, or pipe, or you can reach inside those same work pieces to complete the internal welds which can prove to be much more difficult.

Let this machine be the starting point to assemble your next automatic welding station. If you have any questions about this item, call our toll-free number at 800-288-9414. Our sales staff is available to assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com.

We encourage you to see this machine firsthand by visiting our 44,000 square foot facility in Cincinnati, OH today!