Aronson 4 x 4 ft. Manipulator

Aronson 4 x 4 ft Manipulator

• 150 lb. capacity at either or both ends
• Constant speed powered lift from 25″ to 73″
• Manual hand wheel reach from 7.5″ to 55.5″
• Manual travel car with 360° manual rotation
• Hand pendant control for lift function
• Serial #98158
• Shipping weight: 1,500 lbs.
• Shipping dimensions: 6′ long x 4′ wide x 7′ high

Great Condition, Ready to Ship! 

This Aronson 4 x 4 ft Manipulator would be a great addition to any welding shop. The purpose of a welding manipulator like this one, is to hold the welding equipment over a work piece while the part is moving beneath the torch. Furthermore, the part being welded is usually moved or rotated under the torch by use of a positioner or a set of tank turning rolls. By using a manipulator as a fixture to hold the equipment steady, the welding can take place over a longer period of time without fatigue from the operator which can result in multiple starts and stops. With a manipulator you only need one start and stop to complete most welds. This reduction in starts and stops minimizes the possibility of weld defects which can sometimes be caused from improper starting and stopping.

If you have any questions about this item, or any other items, call our toll free number at 800-288-9414. Our knowledgeable sales staff is available to assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com. 

Above all, we encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility!