14 x 14 ft Pandjiris Column and Boom Weld Manipulator

14×14 ft Pandjiris Column and Boom Weld Manipulator

• Series “1400”
• Vertical boom travel
  • Range: 21-1/8″ to 14′ 9-1/8″
  • 48 IPM hoist speed via 1 HP AC break motor
• Horizontal boom stroke
  • 14′ of stroke beginning 27-1/2″  form center of column
  • Variable speed stroke from 3 to 116 IPM via 3/4 HP DC motor
• Overall height: 18′ 11-1/8″
• Spring loaded; self energizing pawl anti fall device
• Manual 360-degree mast rotation
• 40″x40″ bolt down base
• Hand Pendant Control
• 230/460V input power (Specify upon order)
• Available in different size configurations
• Spec Sheet 

This NEW 14×14 ft Pandjiris Column and Boom Weld Manipulator is designed to speed up the welding process in a number of ways. The purpose of a welding manipulator like this one, is to hold the welding equipment over a work piece so that the operator does not have to keep it in his or her hands while the part is moving beneath the torch. The part being welded is usually moved or rotated under the torch by use of a positioner or a set of tank turning rolls. By using a manipulator as a fixture to hold the equipment steady, the welding can take place over a longer period without fatigue from the operator which can result in multiple starts and stops. With a manipulator you only need one start and stop to complete most welds. This reduction in starts and stops minimizes the possibility of weld defects which can sometimes be caused from improper starting and stopping.

Another very common use for a welding manipulator is using the variable-speed boom as a welding axis to complete longitudinal welds. These longitudinal welds can be completed on the outside perimeter of a tank, vessel, or pipe, or you can reach inside those same work pieces to complete the internal welds, which can prove to be much more difficult.

This 14×14 ft Pandjiris Column and Boom Weld Manipulator includes a manufacturer’s 1-year warranty. Let this machine be the starting point to assemble your next automatic welding station. If you have any questions about this item, call our toll-free number at 800-288-9414. Our sales staff is available to help with any technical questions you may have. In addition, you can email our sales staff at sales@weldplus.com.

We encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility in Cincinnati, OH today!