Pandjiris Mini Pro Welding Lathe

Pandjiris Mini Pro Welding Lathe

• 24” maximum length capacity
• 8” diameter 3 Jaw Chuck
• 700 lb. load capacity
• 175 in-lbs rotational torque 
• Variable speed rotation from 0.65 to 13 RPM
• 10” maximum swing radius 
• 90 degree tilt range, 15-degree increments 
• 115 volt, single phase, 60 cycle input power.
• Includes an on/off foot switch 
• Torch Support Including:
  • Locking slide base
  • Vertical rack and pinion adjuster
  • Impingement angle adjustment
  • Over center adjustment
  • Lead/Lag adjustment
  • Dovetail slides for vertical and cross seam adjustment
  • Torch holder V-block
• Tailstock Including:
  • Live center
  • Filter/Regulator/Lubricator
  • Locking slide base to accommodate 1″ to 24″ part lengths
  • Pneumatic clamping cylinder
  • Convenient operator control of pneumatic clamp
  • 350 lb. weight capacity
• Aluminum machine base to accommodate torch support, tailstock and 24″ part length
• PDF Specs

Complete bench top welding lathe! 

This Pandjiris Mini Pro Welding Lathe is designed to clamp assembled cylindrical parts. In addition, the fixture will hold parts in position and power rotate them about their centerline. The included torch support has a locking slide base, vertical rack and pinion adjuster, and over center adjustment for the perfect angle for a great weld. Lastly the tailstock adds an additional 350lbs of capacity to the drive for a combined 700lbs. 

If you have any questions about this item, or any other items, call our toll free number at 800-288-9414. Our knowledgeable sales staff is available to help assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com. 

Above all, we encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility!