Jetline Welding Lathe CWB 5-240 20′

Jetline Welding Lathe CWB 5-240  

• 1,000 lb. weight capacity. 500 lb. clamping pressure
• 5”-240” length capacity
• 15” maximum diameter capacity
• 6” air actuated tailstock for part clamping
• Jetline model 9500 controller
• Jetline ALC-201 arc length controller with powered torch lifter
• Variable speed carriage
• 5” horizontal and vertical manual slides mounted to 7” diameter pancake swivel
• Miller PC-300 GTAW pulse control
• Weldcraft TIG torch
• 500 Amp ground
• 115V/Air
• Serial #960023

This Jetline Welding Lathe CWB 5-240 has a length capacity of 20′. In addition, the lathe headstock is Jetline’s CWB-5 which is rated up to 1,000 lb capacity.  Furthermore the lathe features three pipe support stands with non-marring wheels. These support stands are adjustable in height and in position on the length of the bed. The welding arm on this lathe is on a manual spotting car that rides on hardened V-ways and roller bearings. The car features a locking hand wheel brake to secure the welding head into position. The tailstock has a pneumatic clamping cylinder to hold the part into position. The cylinder provides up to 500 lbs of clamping pressure. The tailstock is also on a manual spotting car and has similar features as the welding head spotting car.

The welding controls consists of a Jetline 9500 controller, Jetline ALC-201, integrated cold wire feeder, and a Miller PC-300. Furthermore the 9500 controller handles all sequencing and weld program storage for the welding lathe system. In addition, the ALC-201 is an arc length control which monitors and corrects the torch height through out the welding process. The wire feeder is directly controlled through the 9500 and presents filler material under the arc based on instructions stored in the 9500. Lastly, the Miller PC-300 is a pulse controller that works with Miller transformer based TIG machines and varies the arc according to the dials set on the console.