X

Call us today! 1.513.941.4411 / 1.800.288.9414
4790 River Road, Cincinnati, Ohio 45233

Pandjiris 4′ External Seamer

  • Part #: S160603

Pandjiris 4′ External Seamer

  • Model 48E-6/30
  • 54″ total welding/ clamping length capacity
  • 4″ – 32” external diameter capacity
  • .020 – 3/8″ material thickness capacity
  • Model 15-3 VSC rack & pinion driven carriage
  • .1 to 100 IPM variable speed
  • Pandjiris EZ Link carriage control
  • 6” manual vertical & 6” manual horizontal torch adjusters
  • 3” wide aluminum fingers (No copper tips)
  • Plate alignment device
  • Water cooled mandrel
  • Gas purge back up bar
  • Serial # 400-7407
  • Shipping weight: 3,000 lbs.
  • Shipping dimensions: 9′ long x 5′ wide x 7′ high

Available for sale as-is or have it rebuilt to fit your needs!

This Pandjiris 4′ External Seamer is ready to be rebuilt. Our techs will add the welding equipment of your choice or you can buy the machine as-is.  Seam welders like this are designed to give you the ability to quality welded seams by providing clamping, cooling, and a backing surface on which to weld. By having a clamping device that holds the sheet material near the welded seam, the material has little room to move and twist out of position while the seam is being welded.

Cooling is another benefit of having the clamping fingers so close to the welded seam. The fingers act like a heat sink which provides a means to pull the excess heat energy away from the part to minimize the heat affected zone (HAZ) thus reducing the risk of warping the material from heat. Additionally the backing bar provides a means of cooling the seam while also providing the necessary support under the seam to permit the welding process to run hotter without burning holes in the base material. In most cases this allows a welding procedure to be used which results in the full penetration weld.

If you have any questions about this item, or any other items, call our toll free number at 800-288-9414. Our knowledgeable sales staff is available to assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com. 

Above all, we encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility!

If you’re interested in this product, please click “Add to Quote” above and then click on “View Quote” at the top of the page to submit your inquiry.  If you have any immediate questions about this or any other product, please call us at 513-941-4411 and we will gladly help.  Thanks for considering Weld Plus, your source for welding equipment and machinery.

Weld Plus