80 inch Webb Seam Welder Model J80

80 inch Webb Seam Welder Model J80

• 80” clamping/welding length capacity
• 6” minimum part diameter capacity
• 32” maximum part diameter capacity
• Rack and pinion driven variable speed carriage
• Cable tray
• Water cooled back up bar
• 6” manual cross slides
• Welding equipment NOT included
• Serial #7270

Seam welders like this durable 80 inch Webb Seam Welder Model J80 are designed to give you the ability to create quality welded seams by providing clamping, cooling, and a backing surface on which to weld. By having a clamping device that holds the sheet material near the welded seam, the material has little room to move and twist out of position while the seam is being welded. Cooling is another benefit of having the clamping fingers so close to the welded seam. The fingers act like a heat sink which provides a means to pull the excess heat energy away from the part to minimize the heat affected zone (HAZ) thus reducing the risk of warping the material from heat. Additionally the backing bar provides a means of cooling the seam while also providing the necessary support under the seam to permit the welding process to run hotter without burning holes in the base material. This Webb seam welder takes it a step further and has a built in cooling element under the backing bar which allows coolant to circulate under the bar an remove any excess heat. In most cases this allows a welding procedure to be used which results in the full penetration weld.

Weld Plus always welcomes customers to visit our facility to view and inspect our large inventory of welding positioning equipment. We also have a large inventory of used fixed automation systems in stock ready for rebuilding for your welding application. Items like the 80 inch Webb Seam Welder Model J80 located at Weld Plus in Cincinnati, Ohio. Stop in or give us a call 800-288-9414.