20 ft. Flat Sheet Welding Seamer Pandjiris

20 ft Flat Sheet Welding Seamer Pandjiris

• Model 240 FS
• 246” welding/clamping length
• 1/4 to 1 1/2” clamping range
• For flat sheet welding
• Lincoln model TC-3 variable speed travel carriage
• Lincoln NA-3 submerged arc welding system with 4” manual vertical slide
• Individual 6” aluminum fingers
• Water cooled backing bar
• Height of mandrel is 24 1/2”
• 115 volt
• Serial # 651-3822
• Tell us which sub-arc power supply will work best for you.

Seam welders like this 20 ft Flat Sheet Welding Seamer Pandjiris are designed to give you the ability to quality welded seams by providing clamping, cooling, and a backing surface on which to weld. By having a clamping device that holds the sheet material near the welded seam, the material has little room to move and twist out of position while the seam is being welded. Cooling is another benefit of having the clamping fingers so close to the welded seam. The fingers act like a heat sink which provides a means to pull the excess heat energy away from the part to minimize the heat affected zone (HAZ) thus reducing the risk of warping the material from heat. Additionally the backing bar provides a means of cooling the seam while also providing the necessary support under the seam to permit the welding process to run hotter without burning holes in the base material. In most cases this allows a welding procedure to be used which results in the full penetration weld. This seamer is currently equipped with a Lincoln TC-3 travel carriage and a Lincoln NA-3 sub arc welding control with head. Designed for flat sheet applications, this machine is a pass through design which means that, once welded, the sheet will need to be fed under the seamer bed until it exits out of either the front or the back of the machine. This works well when used in conjunction with roller beds that can accommodate a fully welded sheet.

Weld Plus always welcomes customers to visit our facility to view and inspect our large inventory of welding positioning equipment. We also have a large inventory of used fixed automation systems in stock ready for rebuilding for your welding application. Items like this Pandjiris Flat Sheet Welding System are located at Weld Plus in Cincinnati, Ohio. Stop in or give us a call 800-288-9414.