Call us today! 1.513.941.4411 / 1.800.288.9414
4790 River Road, Cincinnati, Ohio 45233

14 ft. Pandjiris External Welding Seamer

  • Part #: S150807P
  • Condition: Used

14 ft Pandjiris External Welding Seamer

  • 174″ total welding and clamping length
  • 11″ minimum diameter capacity
  • 24″ maximum diameter capacity (can be increased with a riser)
  • 3 to 116 IPM variable speed, rack and pinion driven carriage
  • Pandjiris EZ link carriage control
  • 5″ manual front torch slide, 10″ manual rear torch slide
  • 7″ horizontal manual slide
  • Water cooled mandrel
  • Cable tray for all cables
  • Plate alignment device
  • Currently equipped with a Miller D-64M dual wire feeder
  • Shipping weight – 10,500 lbs.
  • Shipping dimensions – 23′ long x 5′ wide x 7′ high
  • Serial #10226E00

This 14 ft Pandjiris External Welding Seamer is in great condition and ready to go to work for you. We can rebuild this machine with the welding equipment of your choice or you can buy the machine as-is with the existing welding equipment. This machine is currently equipped with 450 amp power supply and a dual wire feeder. Seam welders like this are designed to give you the ability to quality welded seams by providing clamping, cooling, and a backing surface on which to weld. By having a clamping device that holds the sheet material near the welded seam, the material has little room to move and twist out of position while the seam is being welded. Cooling is another benefit of having the clamping fingers so close to the welded seam. The fingers act like a heat sink which provides a means to pull the excess heat energy away from the part to minimize the heat affected zone (HAZ) thus reducing the risk of warping the material from heat. Additionally the backing bar provides a means of cooling the seam while also providing the necessary support under the seam to permit the welding process to run hotter without burning holes in the base material. In most cases this allows a welding procedure to be used which results in the full penetration weld.

This 14 ft Pandjiris External Welding Seamer does not currently have a base under it. You can use it as a flat sheet seam welder as it is or we can build a base for you. This machine was last used to weld large diameter tanks and was secured over a mezzanine to accommodate those large vessels. Use this machine the same way, or build a base yourself to save a little money. This machine, as with all inventory we rebuild, comes complete with a warranty. We also offer training here in our facility at no cost to you. You can choose to buy this or any of our machines in the as-is condition. We just encourage you to come to our facility and inspect the machine before doing so.

If you’re interested in this product, please click “Add to Quote” above and then click on “View Quote” at the top of the page to submit your inquiry.  If you have any immediate questions about this or any other product, please call us at 513-941-4411 and we will gladly help.  Thanks for considering Weld Plus, your source for welding equipment and machinery.

Do NOT follow this link or you will be banned from the site!