Miller FILTAIR Fume Extraction Solutions

Miller FILTAIR Fume Extraction Solutions

• Product Line:
  • FILTAIR 130 & 215
  • FILTAIR MWX & Capture 5
  • FILTAIR SWX
  • FILTAIR 4000, 6000, 8000 & 12000

• FILTAIR 130 & 215
  • 1 welding arc per unit
  • Low/Intermittent arc hours
  • Distance to Arc: Less than 6”
• FILTAIR MWX & Capture 5
  • 1 welding arc per unit
  • Medium to high arc hours
  • Distance to Arc: Up to 18” with extraction arm | Up to 5’ with ZoneFlow tech
• FILTAIR SWX
  • Up to 2 welding arcs per unit
  • Medium to high arc hours
  • Distance to Arc: 18” with extraction arm | Up to 5’ with ZoneFlow tech
• FILTAIR 4000, 6000, 8000 & 12000
  • Up to 18 welding arcs per unit
  • High arc hours
  • Distance to Arc: 18” with extraction arm | Up to 5’ with ZoneFlow tech

• PDF of Specs

Product Description

These Miller FILTAIR Fume Extraction Solutions are designed specifically for your welding applications to draw weld fumes away from the operator’s breathing zone and keep your facilities clean. Additionally, the ZoneFlow technology offers the benefit of increased weld fume capture zone up to five feet from the arc compared to traditional systems requiring 12-18 inches for effective capture. Therefore, your operators don’t need to constantly adjust the arm over their weld piece to maintain an effective capture zone – increasing arc-on time, and boosting productivity and efficiency while maintaining a cleaner environment. Moreover, Miller’s comprehensive selection of fume extraction solutions can be used with up to 18 arcs per unit depending on the size of your operation. Similarly, each product can be used on a variety of applications, from small to large weldments, requiring a low, medium or high number of arc hours. Easily maneuver the fume extraction arms with simple hand adjustments and enjoy less downtime disposable or self-cleaning filters. 

As a result, each solution was designed & engineered for specific environments. For light fabrication, manufacturing, contracting, and maintenance or repair work, consider the FILTAIR 130 & 215 for their lightweight design & portability. With four wheels for easy movement, the FILTAIR MWX & Capture 5 support use in fabrication, heavy equipment work, maintenance and repair, and training facilities where mobility matters. Conversely, save much needed floor space by mounting the FILTAIR SWX above weld stations in those same fabrication, manufacturing, and training environments. Lastly, for larger operations, the FILTAIR 4000 through 12000 systems support fabrication and manufacturing as part of a centralized setup and can integrate into existing ductwork.  These systems can be installed indoors or outdoors, making them a cost-effective choice for facilities with many welding stations.

If you have any questions about this or any other item, call our toll-free number at 800-288-9414. Our knowledgeable sales staff is available to assist with any technical questions that you may have or help you customize each solution to meet the requirements of your existing applications. In addition, you can email our sales staff at sales@weldplus.com.

We encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility!