Gullco KBM-18 Beveler

Gullco KBM-18 Beveler

• Model: KBM-18
• Max Bevel Width: 0.71” at standard 30 degree bevel angle on material with a tensile strength of 64,000 lb/in 2
• Max Bevel Depth: 0.61” at standard 30 degree bevel angle on material with a tensile strength of 64,000 lb/in 2
• Min Plate Thickness: ¼” 
• Max Plate Thickness: 1 ½” 
• Bevel Speed: 13’ per minute
• Available Input voltages: 230V, 460V & 575V, 3 Phase
• Weight: 340 lbs. Including undercarriage assembly
• Also available with different under carriages and KBM-18U model
• KBM18 – Spec Sheet

This Gullco KBM-18 Beveler is deigned to run on the edge of plate. First of all it produces clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminium plate from ¼ to 1 ½”. In addition, this unit automatically bevels the top side of the plate which results in reduction of time and cost. Another great feature is the angle pins that enable bevel angle adjustments. It allows you to angle at 30, 22 ½, 37 ½, 45 and 55 degrees. Lastly you can add on the undercarriages for an additional charge.

If you have any questions about this item, or any other items, call our toll free number at 800-288-9414. Our knowledgeable sales staff is available to help assist with any technical questions that you may have. In addition, you can email our sales staff at sales@weldplus.com. 

Above all, we encourage you to get a firsthand look at this machine by visiting our 44,000 square foot facility!