Amet CMC-66SB Cladding System

Amet CMC-66SB Cladding System

• Horizontal Motion: Precision boom motion with 72 in (1829 mm) of stroke
• Vertical Motion: Precision column motion with 72 in (1829 mm) of stroke
• AVC (Arc Voltage Control) is built into both the vertical and horizontal axes of the manipulator to provide vectored AVC
• Column Rotation: Servo motor controlled with 270 degrees of rotation
• Weld Head Rotation: The weld head is capable of continuous rotation in either direction
• Bore Diameter Range: 3.5 in (89 mm) to 72 in (1829 mm) bore diameter
• Bore Height: Maximum of 63 in (1600 mm)
• Part Geometry Capabilities: Cylindrical, racetrack, and oval shaped parts with off-center and off-angle intersecting bores
• Wire Feeder: 1 to 500 in/min (25 to 12700 mm/min) programmable wire feed speed
• Hotwire Power Supply: 200 Amps up to 20 Volts
• Welding Power Supply: Output Min: 5 Amps, Max: 300 Amps at 100% duty-cycle or 350 Amps at 40% duty-cycle
• Water Circulator: Capable of cooling torches up to 500 Amps
• Water-cooled Bore Torch:
  • Minimum Bore Diameter: 3.5 in (89mm)
  • Max Weld Current: 350 Amps at 100% duty-cycle
  • Max Hotwire Current: 70 Amps
  • Reach: 48 in (1219 mm)
• System Includes:
  • AMET XMC-1 Controller and Remote Pendant
  • AMET 6′ by 6′ Column and Boom
    • Precision Servo Controlled Harmonic Drive Rotary Base
    • Precision Servo Controlled 6′ mast, and 6′ Boom
  • Continuous Rotating Weld Head
    • Continuous slip ring assembly
    • Hotwire Wire Feeder Assembly
    • Standard and Compact Bore Torch Assembly
  • Lincoln S350 Power Wav, CoolArc 40 Water Circulator
  • Palletized Industrial mounting skid with controls enclosure
  • Bore Cladding Operator Console

Smart cladding of large parts & non-circular bores